Accessories

LOW FLOW SAMPLING ADAPTER                

 

 

                                                                                           NON-RETURN CHECK VALVE    

 

 

 

 

 

 

 

 

 

 

 

QUICK CONNECT BATTERY ADAPTER

  DRILLERS SERVICES, INC.    Hickory, North Carolina USA       800-334-2308, ext. 230    

        [Home][About Us][Products][News][Trade Shows][Contact Us]

 

 

This Quick connect battery adapter is connected to the Low Flow Sampling Adapter,
therefore, bypassing the Low Flow Sampling Controller allowing a direct connection to the battery. Used with the Standard Pump Line only!

       

The Non-Return Check Valve is a universal top fitting accessory is used to prevent water back-flow when the technician shuts off the pump. Ideal use is when technician is conducting a low flow sampling event. Constructed of PVC. A  stainless steel spring and silicon stopper which prevents any water from going back down into the water column once the pump is turned off.

Simply slide the connector over the discharge hose that is attached on the pump.

The battery clamps are removed at factory and replaced with a Low Flow Sampling Adapter, thus, allowing direct connect to the Low Flow Sampling Controller, below.

(Used only with Standard Pump Line)    

Picture of Low Flow
 Sampling Controller