Clearview Bailers

Clear PVC Disposable Bailers

ClearView Bailers are truly the highest quality disposable bailers in the field. The ClearView disposable

bailers, are of a higher quality than polyethylene bailers, in all aspects. They sink faster without weight, do

not bend or distort, retrieve larger volumes, just to name a few. Stop wasting time and money. Reduce

your sampling costs with these quality disposable bailers.

Sold in Case Quantities Only: 1' - 60 units per case, 3' and 4' - 30 units per case, 7' - 8 units per case

Clear PVC Bailer

Clearview Bailers

Benefits:

• PVC naturally sinks in water, due to its specific gravity, relative to water.

• No weights to restrict flow of sample entering and exiting bailer.

• PVC is very ridged, stays straight, never bending or distorting under

normal care. (This is very important for the smaller diameter .45 inch

and .70 inch bailers, which are carefully extruded for straightness).

• Material is clear, to assist in field sampling, that may require visual inspection

of the sample taken. (Actually see the product sampled from ground water

remediation wells and fuel tanks, for example).

• Tested and approved, by established legal environmental testing firm, for

leaching, absorption and over all performance. Results came in with A+

ratings for areas tested. Tested under Methods 8260 & 8260B

Material:

Tubing: Virgin medical grade Poly Vinyl Chloride. (Same medical grade PVC resin used in the manufacturing of

catheters, for treatment of medical patents.)

Tops and Bottoms ABS

Ball: High grade PVC material.

Specially Designed Tops:

• Allowing samples to be poured accurately, with little or no splashing

• Strong ridged tethering attachment for secure fastening of bailer rope

• Each part is press fitted and double welded, to assist in the bonding of tube to top device.

Specially Designed Bottoms:

• Redesigned ball seat helps to deter sticking of ball, with out sample loss, between ball and device.

• Large .65 inch opening allowing for large volumes of product to rapidly fill the bailer with minimal disturbance

to the sample. Also speeds up sampling and or purge time, thus saving money.

• Each part is press fitted and welded, for little or no leaking between tube and bottom device.

DRILLERS SERVICES, INC. Hickory, North Carolina USA 800-334-2308, ext. 230