Description	Lb / Kg	Part #
13/16" (21mm) Hex Socket	2 (.9)*	565004656
1 1/8" (29mm) Hex Socket	3 (1.4)	565004657

1 5/8" (41mm) Hex Socket

4 (1.8)

565004517

2" (51mm) Hex Socket

7 (3.2)

565004658

An auger hoisting assembly is

 used when it is required to

 pull standard construction

 or HEX -COR™ augers

 vertically utilizing the main

 hoist. This technique allows

 the driller to pull more than

 five feet of auger at a time.

HOISTING ASSEMBLY

An auger holder is used to

 temporarily support standard

 construction or HEX-COR™

 augers during removal of the

drill string after soil sampling or

 monitoring well installation has

 been completed. The above

 design is only representative.

Other designs may vary.

AUGER HOLDER PLATE

Description	Lb / Kg	Part #
1125 Series	4 (1.8)	565001328
1500 Series1	9 (4.1)	565001329

2000 Series	14 (6.4)	565001330
2875 & 2625 Series	21  (9.5)	565001332

¹ Order P/N 56501330 for 5" (127mm) and 6"

 (152mm) hole size augers in this series.

DRILLERS SERVICE, INC.                   HICKORY, NC USA                  800-334-2308,  EXT. 230

    [About Us][Products][News][Trade Shows][Contact Us]  [Previous]