HOLLOW STEM AUGERS
LEAD SECTION ASSEMBLY: 4 3/4 (111mm) O.D
|
Description |
Lb/Kg |
Part No. |
|
2' 6" (762mm), 13/16" (21mm) Hex, AWML Rod |
38 (17.2) |
56561023-01 |
|
2' 6" (762mm), 13/16" (21mm) Hex, EW Rod |
35 (15.9) |
56561023-04 |
COMPONENT PARTS
|
Ref |
Description |
Lb/ Kg |
Part No. |
|
1 |
Drive Cap 13/16″ (21mm) Hex |
6 (2.7) |
565150404 |
|
1 |
Drive Cap: 1-1⁄8″ (29mm) Hex |
6 (2.7) |
565150399 |
|
2 |
Rod Bolt |
* |
5653100-0128 |
|
3 |
Hex Nut |
* |
5653122-0012 |
|
4 |
Lockbolt - (w/o Hard Face) |
* |
565217135 |
|
4 |
Lockbolt - (Hard Faced) |
* |
565150383 |
|
5 |
Handle, 1/2" (13mm) Sq. Drive Flex X 1'6" (457mm) |
3 (1.4) |
56513781-0009 |
|
6 |
Socket, 15/16" (24mm) Hex |
* |
5653782-0013 |
|
7 |
Adapter: EW Rod to Drive Cap |
1 (.5) |
565150402 |
|
7 |
Adapter: AW Rod to Drive Cap |
2 (.9) |
565150310 |
|
7 |
Adapter: AWML Rod to Drive Cap |
2 (.9) |
565150311 |
|
8 |
Pin Coupling, (Repair Only) |
6 (2.7) |
565150296 |
|
9 |
Auger Section - 2'6″ (763mm) |
17 (7.7) |
565150414 |
|
10 |
Center Rod - 2'6″ (763mm), AWML |
7 (3.2) |
5650150416 |
|
10 |
Center Rod - 2'6″ (763mm), EW |
7 (3.2) |
565001753 |
|
11 |
Box Coupling (Repair Only) |
3 (1.4) |
565150385 |
|
12 |
Plug - 13/16″ (21mm) Hex Socket to EW Box |
4 (1.8) |
565180448-01 |
|
12 |
Plug - 13/16′ (21mm) Hex Socket to AW Box |
4 (1.8) |
565180448-02 |
|
12 |
Plug - 13/16″ (21mm) Hex Socket to AWML Box |
4 (1.8) |
565180448-03 |
|
14 |
Plug Bolt. |
* |
5653130-0062 |
|
15 |
Pilot Bit, 13/16″ (21mm) Hex |
1 (.5) |
565004981 |
2-1⁄4″ (57mm) LITE-FLITE™ AUGER
LITE-FLITE augers are designed to fill the need fo r a lightweight, low cost hollow stem auger for use with lightweight drilling rigs having a maximum torque output of not more than 3750 ft-lbs. For stronger machines, use standard duty 2-1⁄4″ I.D. 2-key HSA. LITE-FLITE’s 2-1⁄4″ (57mm) I.D.will allow monitor well placement and standard penetration testing with 2′ (51mm) tools and equipment to a maximum of 22.5′ (6.8m). Sizes are identified by hollow stem auger I.D. Order a lead section and the following as needed: Cutterhead, pilot bit, extra auger sections and center rods.
DRILLERS SERVICE, INC. HICKORY, NC USA 800-334-2308, EXT. 230