HOLLOW STEM AUGERS
8-1⁄4″ (210mm) TRI-LOK™ AUGER
Now with thicker flight and heat-treated pins for extended life. Used for 6″ (152mm) monitoring/recovery well installation. Sizes are identified by hollow stem auger I.D. Order a lead section and the following as needed: Cutterhead, pilot bit,extra auger sections and center rods.
5′0′ (1.5m) LEAD SECTION ASSEMBLY: 12 (305mm) O.D
|
Description |
Lb/Kg |
Part No. |
|
2′ (51mm) Hex, NW Rod |
326 (147.9) |
56561026-03 |
|
2′ (51mm) Hex, NWML Rod |
326 (147.9) |
56561026-04 |
DRILLERS SERVICE, INC. HICKORY, NC USA 800-334-2308, EXT. 230
[About Us][Products][News][Trade Shows][Contact Us] [Previous] [Next]
COMPONENT PARTS
|
Ref |
Description |
Lb / Kg |
Part No. |
|
1 |
Drive Cap: 2″ (51mm) Hex |
57 (122.2) |
565150534 |
|
2 |
Rod Bolt |
* |
5653100-0289 |
|
3 |
Hex Nut |
* |
5653122-0012 |
|
4 |
Lockbolt - 2 Req’d |
* |
565217136 |
|
4 |
Lockbolt - 2 Req’d (Hard Faced) |
* |
565150307 |
|
5 |
Bushing, Replaceable |
* |
565150477 |
|
6 |
Handle |
* |
5653781-0009 |
|
7 |
Socket |
* |
5653782-0016 |
|
8 |
Adapter: NW Rod to Drive Cap |
11 (5) |
565180049-03 |
|
8 |
Adapter: NWML Rod to Drive Cap |
5 (2.3) |
565180054-04 |
|
9 |
Coupling Pin, Heat-Treated (Repair Only) |
18( 8.2) |
565150525 |
|
10 |
Auger Section - 5′0″ (1.5m), |
144(65.3) |
565150531 |
|
11 |
Center Rod - 5′0″ (1.5m), NW |
32 (14.5) |
565001608 |
|
11 |
Center Rod - 5′0″ (1.5m), NWML |
35 (15.9) |
565006278 |
|
12 |
Box Coupling (Repair Only) |
18 (6.8) |
565150529 |
|
13 |
Plug - 1-5⁄8″ (29mm) Hex to NW Box |
34 (15.4) |
565180036-19 |
|
134 |
Plug - 1-1⁄8″ (29mm) Hex to NWML Box. |
34 (15.4) |
565180036-20 |
|
14 |
Plug Bolt. |
* |
5653130-0191 |
|
16 |
Pilot Bit Shank: 1 5/8" (41mm) Hex |
3 (1.4) |
565004591 |
|
17 |
Pilot Bit |
8 (5) |
565007188 |
|
17 |
Pilot Bit: 1 5/8" (41mm) Hex, 3-wing |
* |
565150574-04 |
|
|
Repair Key |
* |
565150579 |
|
|
Clean Out Tap (ForBushing) |
* |
565150562 |
|
|
O-Ring |
* |
5653538-0263 |