TAM LI
Inflatable Packers
TAM LI packers are designed for reliability in downhole environments with differential pressures up to
1,000 PSI (69 BAR). With durable steel reinforced inflation elements, these sliding-end packers are an
excellent choice for repeated operation. If necessary, the element can be easily replaced. The TAM LI
inflatable packers are available
in all standard sizes as shown below.
OD can be built up for
larger hole sizes.
IMPORTANT: The suggested ratings on the graph are not a measure of the packer's self-anchoring
capability, which may be less than the suggested rated working pressure and may vary under certain
circumstances.
Consult TAM International for details.
|
Part Number |
Part Number |
|
|
|
|
|
Infation Element |
Overall Single |
Overall Straddle |
|
|||
|
Single |
Straddle |
Packer OD |
Packer ID |
Thread |
Seal Length |
Packer Length |
Packer Length |
Inflate Line |
|||||
|
Packer |
Packer |
inches |
mm |
inches |
mm |
Connection |
inches |
mm |
inches |
mm |
inches |
mm |
Connection |
|
170-LI-01 |
170-LW-01 |
1.70 |
43.20 |
0.51 |
13.0 |
3/4" NPT |
14.0 |
355.6 |
31.8 |
807.72 |
66.1 |
1678.94 |
1/4" NPT |
|
213-LI-01 |
213-LW-01 |
2.13 |
54.10 |
0.96 |
24.4 |
1" NPT |
25.0 |
642.2 |
51.8 |
1315.72 |
105.1 |
2667.00 |
1/4" NPT |
|
250-LI-01 |
250-LW-01 |
2.50 |
63.50 |
0.82 |
20.8 |
3/4" NPT |
23.0 |
584.2 |
49.1 |
1247.14 |
100.1 |
2540.00 |
1/4" NPT |
|
275-LI-01 |
275-LW-01 |
2.75 |
69.90 |
1.28 |
32.5 |
1 1/4" NPT |
16.0 |
406.2 |
46.0 |
1168.40 |
91.7 |
2329.18 |
1/8" NPT |
|
350-LI-01 |
350-LW-01 |
3.50 |
88.90 |
2.06 |
52.3 |
2" NPT |
16.0 |
406.4 |
44.5 |
1130.30 |
88.3 |
2242.82 |
1/4" NPT |
|
550-LI-01 |
550-LW-01 |
5.50 |
139.70 |
3.07 |
78.0 |
3" NPT |
23.0 |
584.2 |
52.4 |
1330.96 |
104.8 |
2661.92 |
1/4" NPT |
|
550-LI-02 |
550-LW-02 |
5.50 |
139.70 |
3.07 |
78.0 |
3" NPT |
42.0 |
1006.8 |
63.2 |
1605.28 |
126.2 |
3205.48 |
1/4" NPT |
|
775-LI-01 |
775-LW-01 |
7.75 |
196.90 |
5.05 |
128.3 |
5" NPT |
26.0 |
660.4 |
70.8 |
1798.32 |
141.6 |
3596.64 |
1/4" NPT |
|
11-LI-01 |
11-LW-02 |
11.00 |
279.40 |
7.82 |
198.6 |
8" NPT |
29.0 |
736.6 |
77.0 |
1955.80 |
157.8 |
4008.12 |
1/4" NPT |
NOTE: Longer
seal lengths are available on special order.
Maximum temperature rating is
150° F (66° C).
The Inflation Element is manufactured using nitrile
elastomer.
DRILLERS SERVICES, INC. Hickory, North Carolina USA 800-334-2308, ext. 230