MOBILOK™ JET AUGER
|
AWML (AWJ) Auger |
|
Description |
Lb / Kg |
Part # |
|
4 1/2" X 3'0" (114mm) X (914mm) |
13 (5.9) |
565007161 |
|
4 1/2" X 5'0" (114mm) X (1.5m) |
22 (10.0) |
565006271 |
|
4 1/2" X10'0" (114mm) X (3.1m) |
43 (19.5) |
565006272 |
|
NWML (NWJ) Auger |
|
Description |
Lb / Kg |
Part # |
|
4 1/2" X 5'0" (114mm) X (1.5m) |
22 (10.0) |
565006275 |
|
4 1/2" X10'0" (114mm) X (3.1m) |
43 (19.5) |
565005655 |
|
6" X 5'0" (152mm X 1.5m) |
53 (24.0) |
565006273 |
|
6" X 10'0" (152mm X 3.1m) |
96 (43.5) |
565006274 |
|
AWML (AWJ) Rod Specifications |
|
Hole Size |
D Diameter |
P Pitch |
Rod ID |
Rod OD |
Coupling ID |
|
4 1/2" (114mm) |
4" (102mm) |
3 1/3" (89mm) |
1 3/8" (35mm) |
1 3/4" (44mm) |
5/8" (16mm) |
|
NWML (NWJ) Rod Specifications |
|
Hole Size |
D Diameter |
P Pitch |
Rod ID |
Rod OD |
Coupling ID |
|
4 1/2" (114mm) |
4 1/8" (105mm) |
3 1/3" (89mm) |
2 1/4" (57mm) |
2 5/8" (67mm) |
1 1/8" (29mm) |
|
6" (152mm) |
5 5/8" (143mm) |
5" (127mm) |
2 1/4" (57mm) |
2 5/8" (67mm) |
1 1/8" (29mm) |
MOBILOK™ JET AUGER
The premier retraction grouting tool for overburden
applications with augers. MOBILOK jet augers are
designed for wet or dry hard formation drilling in lime
rock, bauxite or like materials. Premium MOBI -LOK
drill rod “J” Series is used for thecenter stem and allows
for circulation ofdrilling mud, grout or fresh water to aid
in well installation or tie-back. Excellent auger for use
during retraction grouting if ENVIRO-CORE® is not at
the site. Flight edges are hardfaced for wear resistance.
Heavy wall couplings and tapered threaded connections
provide an extra strong, water tight joint and speed “
making and breaking” joints. MOBILOK jet augers are
identified by the hole size, not actual flight diameter.
D-P ROCK BIT
|
Description |
Lb / Kg |
Part # |
|
4 1/2" (114mm), AWML Pin (5 Bits) |
8 (3.6) |
565006290 |
|
4 1/2" (114mm), NWML Pin (5 Bits) |
9 (14.1) |
565006291 |
|
6" (152mm), NWML Pin (7 Bits) |
17 (7.7) |
565006293 |
COMPONENT PARTS
|
Description |
Lb / Kg |
Part # |
|
Carbide Insert Bit |
3 (1.4) |
565004627 |
|
D-P Bit Punch |
4 (1.8) |
565004626 |
|
Description |
Lb / Kg |
Part # |
|
Cutterhead: 4 1/2" (114mm), AWML (AWJ) Pin |
7 (3.2) |
565006765 |
|
Cutterhead: 4 1/2" (114mm), NWML (AWJ) Pin |
7 (3.2) |
565006766 |
|
Cutterhead: 6" (152mm), NWML (NWJ) Pin |
20 (9.1) |
565006768 |
3 WING CARBIDE INSERT DRAG BIT
DRILLERS SERVICE, INC. HICKORY, NC USA 800-334-2308, EXT. 230
[About Us][Products][News][Trade Shows][Contact Us] [Previous] [Next]