PRESSURE TRANSDUCER
PS9805 SUBMERSIBLE PRESSURE TRANSDUCER (mV output)
• Low power, passive operation
• Small diameter
• Double-sealing
• Pressure and temperature outputs
• 316 stainless steel, Viton® and Teflon® construction
• Polyethylene, polyurethane and FEP Teflon® cable options
• Competitive pricing,
• Immediate availability
DESCRIPTION
INW’s improved PS9805 submersible pressure transducer is designed to provide level and temperature measurement in most types of liquid environments. The PS9805 features the latest in silicon, micro-machined, piezoresistive, strain gauge technology, and temperature measurement technology. This sensor is specifically designed to be compatible with Campbell Scientific measurement and control equipment. The cable harness design reduces the probability of leakage and protects the cable jacket from damage by providing double-sealing; 316 stainless steel, Viton® and Teflon® construction increases corrosion resistance. The transducer’s end cone is inter- changeable with a 1/4” NPT inlet, which expands application possibilities by permitting easy hook-up and field calibration. The modular-designed PS9805 may be easily factory serviced and repaired.
OPERATION
The PS9805 pressure/temperature transducer requires a minimum of one differential channel and one single ended channel to measure pressure and one single ended channel to measure temperature. Data is processed within the data- logger and the results are converted to the desired units of pressure and temperature. If desired, an optional enhanced thermal calibration can also be performed to more accuratelycompensate for temperature changes.
APPLICATIONS INDUSTRIES
Ground water monitoring Environmental Rremediation
Tank and tidal levels Irrigation
Pump control Natural resource management
Flow monitoring Mining
Stream stage Water Supply
Aquifer testing Wastewater treatment
PS9805 cable harness
design showing double
seal and strain relief.
DIMENSIONS AND SPECIFICATIONS
HOW TO ORDER
• Choose the transmitter with the required pressure range.
• Determine cable type and specify length.
• Contact us for a full list of accessories.
PS9805 SUBMERSIBLE PRESSURE TRANSDUCER RANGES
|
Part # |
Pressure Range |
Part # |
Pressure Range |
|
5773C300 |
5 PSIG |
5773C303 |
50 PSIA |
|
5773C301 |
15 PSIG |
5773C304 |
100 PSIG |
|
5773C302 |
30 PSIG |
PS9805 CABLE OPTIONS
|
Part # |
Description |
|
5776E540 |
Polyurethane Cable |
|
5776E542 |
Polyethylene cable |
|
5776E543 |
FEP Teflon® Cable |
PS9805 OPTIONS (factory performed or installed)
|
Part # |
Description |
|
5773C282 |
Enhanced Temperature Calibration |
|
5773D106 |
M-10 Mil-Spec Connectors |
ACCESSORIES
|
Part # |
Description |
|
5776E410 |
1/4” NPT Adapter Kit |
|
5776E517 |
Transducer Cable Strain Relief Kit |
Information in this document is subject to change without notice.
MECHANICAL
Transducer
|
Body Material |
316 Stainless Steel |
|
Wire Seal Materials |
Viton® and Teflon® |
|
Desiccant |
High & Standard (Capacity Available) |
|
Terminating Connector |
Available |
|
Weight |
.75lbs. |
Cable
|
OD |
0.28” max. |
|
Break Strength |
138 lbs. |
|
Maximum Length |
2000 feet |
|
Weight |
4 lbs. per 100 feet |
ELECTRICAL
|
Linearity/ |
±0.1% FSO (typical) |
|
Repeatability/Hysteresis* |
/ ±0.1% FSO (typical) |
|
Typical Output Voltage Sensitivity at 20° C |
15-16 mV/V |
|
Maximum Zero Offset at 20° C |
3 mV |
|
Common Mode Voltage |
Vi/2 |
|
Bridge Resistance at 20° C |
4 kohm (typical) |
|
Standard Temperature Error 0-40 degrees |
±2.0% FSO |
|
Enhanced Temperature |
±.0.2% FSO |
|
Error if optional calibration is ordered |
0-40 degrees |
|
Typical Excitation Voltage |
0.8 volts |
|
Compensated Temperature Range |
0-40° C |
|
Operating Temperature Range |
-5° to 70° C |
|
Over Range Protection |
2x Full Scale Range |
DRILLERS SERVICE, INC. HICKORY, NC USA 800-334-2308, EXT. 230
/