PORTLAND CEMENT

                                                          MATERIAL SAFETY DATA SHEET

                                                                (OSHA 29 CFR 1910.1200)

                                                               FOR PORTLAND CEMENT

 

Part Numbers & Description:

560CEMENT1          Portland Type I Cement

560CEMENT2          Portland Type II Cement

SECTION II - CHEMICAL DATA

Ingredients:

Tri Calcium Silicate 3 CaO.SiO2

Tetra Calcium Alumina Ferrite 4CaO.A12O3.Fe2O3

Gypsum CaSO4.2H2O

Small amounts of CaO, MgO, NaSO4, K2SO4 may be present.

 

SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS

Solubility in Water:         Slight (0.1% - 1.0%)

Specific Gravity:             3.15

Gray colored powder with no odor.

 

The following properties are not applicable as

portland cement is a solid powder form:

Boiling Point, Vapor Pressure, Vapor Density,

Melting Point, Evaporation Rate

 

SAKRETE

AVERAGE COMPRESSIVE STRENGTH: 4000 psi
INGREDIENTS: 3/8" pea gravel, 1/2" crushed gravel, washed and graded sand and Portland cement.
COVERAGE: 90 lb. bag yields 2/3 cubic ft. or covers 4 square feet 2" deep.
Meets Federal quality standards (USCE-C-74) and ASTM C 387.
PACKAGING: 90 lb. 42/pallet - 80 lb. 42/pallet - 60 lb. 48/ pallet

 

 

 

 

 

 

 

Drillers Service, Inc.                            Hickory, NC USA                                   800-334-2308, Ext. 230